| [CRTech] Christian Radio Tech |
[MSG 26452] |
|
|
Re: CRB changes and U4K reboots
|
|
|
|
|
I assume all we have to do is turn off the
power for 30 seconds and then turn it back on?
Tom
ACN
----- Original Message -----
Sent: Monday, December 04, 2006 10:41
AM
Subject: RE: [CRTech] CRB changes and U4K
reboots
How can I reboot remotely? (I can send
signals via SatSked while remotely logged into my station computer.) I
won't be physically at my station till the weekend.
At 11:52 AM
12/04/2006, you wrote:
Can someone from CRB (if you are
on this list) or the CRC in general chime in here on this one? I never
recall having to reboot a U4K to pick up a new channel.
Is this the
case because they are a non-CRC member? Is the receiver reboot a
COMPEL command they cannot do?
-Peter
On Tuesday December 5th at 6:00
AM we are changing our 3 letter identifiers on the Unity 4000
receiver. Routes will remain the same. The only
thing changing with be the identifier. You will need to reboot
the receiver to find them. I am told if you don't reboot you will
not be able to receive our audio. The changes are as
follows.
CRB will become CB1 AL1 will become CB2
Let me
know if you have any questions. Thanks.
Graham
Parker Operations Manager, CRB Satellite Network Operations Manager,
WSNL 810-694-4146
--------------------------------------------------------------------- For
CRTech resources visit http://CRTech.org/ To unsubscribe, e-mail:
crtech-unsubscribe@crtech.org List problems? E-mail:
TechStaff@CRTech.org
-- No virus found in this
incoming message. Checked by AVG Free Edition. Version: 7.1.409 /
Virus Database: 268.15.6/568 - Release Date:
12/04/2006
--------------------------------------------------------------------- For
CRTech resources visit http://CRTech.org/ To unsubscribe, e-mail:
crtech-unsubscribe@crtech.org List problems? E-mail: TechStaff@CRTech.org
No virus found in this incoming message. Checked by AVG Free
Edition. Version: 7.5.430 / Virus Database: 268.15.6/568 - Release Date:
12/4/2006 3:20 PM
|
|
|
|
|
CRTech.org
|