Thanks, all, for the refresher course! Since this "symptom" hasn't appeared
here before, I guess I'll watch for awhile today, then reboot it anyway
since we're going into a weekend.
Thanks too, Lloyd, for your kind offer. I don't think we'll need to take
you up on it but we'll certainly keep it in mind if the thing starts to get
really squirrelly.
Mike - Omaha
-----Original Message-----
From: Mark W. Croom [mailto:markc@kjly.com]
Sent: Friday, December 01, 2006 09:39
To: CRTech
Subject: Re: [CRTech] Unity ebNo question
Mike,
I have a couple of receivers on large dishes that start after a reboot with
EbNo's around 12 then climb to >14 over time and they work fine.
On the rare occasion when those receivers start to misbehave (funny audio
dropouts or whatever) then we pull the plug and they normally go back to
working 100% again.
Mark
MN
----- Original Message -----
From: "Mike Shane" <junjulaug@tconl.com>
To: <crtech@crtech.org>
Sent: Friday, December 01, 2006 8:51 AM
Subject: [CRTech] Unity ebNo question
>I remember seeing traffic here at times about getting an EbNo reading on
>the
> Unity of >14. Having never experienced it myself, I haven't concerned
> myself with that traffic too much, except to remember that this may mean
> an
> impending problem.
>
> Now I am experiencing that reading. This is on a receiver that has been
> in
> service since 1999 and has never shown this reading before on two
> different
> dish installations (one hardly ever got higher than 9 and this one has
> never
> reached 13 to my knowledge).
>
> Seems like there were some quick fixes posted here (like a reboot) and
> also
> some info pertaining to different factory runs of these units. Don't
> remember how long ago it was last posted, haven't looked in the archives
> to
> see if it's still there, but thought I'd try a post and see if I can cut
> to
> the chase.
>
> Thanks in advance for any help.
>
> Mike Shane
> Operations Manager
> 660 KCRO Omaha's Christian Talk
---------------------------------------------------------------------
For CRTech resources visit http://CRTech.org/
To unsubscribe, e-mail: crtech-unsubscribe@crtech.org
List problems? E-mail: TechStaff@CRTech.org
|